Чего не получается-то. Качаешь полную версию (в которой есть файлы прошивки 2.5), копируешь всё на Memory Stick. Точно так же делаешь с обновлением до 1.41. Запускаешь саму программу.
Там есть поля UMD Version и Firmware. Их и надо менять.
All of the above games tested using the same settings as follows:
UMD Select: Select Your iSO File,
UMD Mount: ISO ANYUMD (set it),
Firmware: 2.50+2.00 (set it),
Boot Select: Reboot XMB (set it),
UMD Version: 2.XX -> 2.00 (set it, or you will get a 2.6 error),
and
CPU Clock: 333 MHz / 166 MHz
If you have more than one iSO on your Memory Stick, start emulating the Firmware and go to the UMD Icon under GAME. Your selected iSO should appear now (like you've done before). Now, press HOME + R-Trigger.. and the next iSO will be selected and shown as UMD. Pressing HOME + L-Trigger selects the other iSO